Chapter 4

Chapter 4 presented the components in the system unit, described how memory stores data, instructions, and information, and discussed the sequence of operations that occur when a computer executes an instruction.

Describe The Components In The System Unit

The system unit, sometimes called the chassis, is a box-like case housing the electronic components of a computer that are used to process data. System unit components include the processor, memory module, cards, ports, and connectors. Many of the system unit’s components reside on a circuit board called the motherboard. The motherboard contains many different types of chips, or small pieces of semiconducting material, on which one or more integrated circuits (IC) are etched. An integrated circuit is a microscopic pathway capable of carrying electronic current. Each IC can contain millions of transistors, which act as switches for electronic signals.

How The CPU Uses The Four Steps Of A Machine Cycle To Process Data

The central processing unit (CPU), also called a processor, significantly impacts overall computing power and manages most of a computer’s operations. The CPU contains the control unit and the arithmetic/logic unit. The control unit directs and coordinates most of the operations in the computer. For every instruction, the control unit repeats a set of four basic operations called the machine cycle: (1)fetching the instruction or data item from memory, (2) decoding the instruction into commands the computer understands, (3) executing the commands, and, if necessary, (4) storing, or writing the result to memory. The arithmetic/logic unit (ALU) performs the execution part of the machine cycle. Specifically, the ALU carries out three operations:

• Arithmetic operations – performing calculations, which include addition, subtraction, multiplication, and division
• Comparison operations – comparing data items to determine if the first item is greater than, equal to, or less than the other item
• Logical operations – working with conditions and logical operators such as AND, OR, and NOT
• Compare and contrast various personal computer processors on the market today 

The Various Types Of Memory 

Memory is a temporary storage place for data, instructions, and information. Memory stores the operating system, application programs, and the data processed by application programs. A byte is the basic storage unit in memory. Memory size is measured by the number of bytes available for use. A kilobyte (KB or K) of memory is approximately one thousand bytes, a megabyte (MB) is approximately one million bytes, and a gigabyte (GB) is approximately one billion bytes. The system unit contains several types of memory.

RAM (random access memory) consists of memory chips that the processor can read from and write to. Most RAM is volatile memory, meaning that its contents are lost when the computer’s power is turned off. Two basic types of RAM chips are dynamic RAM and static RAM. Dynamic RAM (DRAM) must be re-energized constantly or it loses its contents. Static RAM (SRAM) is faster and more reliable than DRAM and has to be re-energized less often, but it is much more expensive.

Memory cache, also called a cache store or RAM cache, improves processing time by storing frequently used instructions and data. ROM (read-only memory) refers to memory chips that only can be read and used; that is, they cannot be modified. ROM is nonvolatile memory (NVM), meaning that its contents are not lost when the computer’s power is turned off. A variation of the ROM chip, called programmable read-only memory (PROM), is a blank chip on which you can place items permanently.

Flash memory, also known as flash ROM or flash RAM, is nonvolatile memory that can be erased electronically and reprogrammed. Complementary metal-oxide semiconductor (CMOS) memory, another type of memory chip, stores configuration information about the computer and uses battery power to retain information when the power to the computer is off.

 The Difference Between A Serial, A Parallel, And A USB Port

A cable often attaches external devices to the system unit. A port is the interface, or point of attachment, to the system unit. Ports have different types of connectors, which are used to join a cable to a device.Male connectors have one or more exposed pins, while female connectors have matching holes to accept the pins. Most computers have three types of ports: serial, parallel, and USB. A serial port is a type of interface that connects a device to the system unit by transmitting data only one bit at a time. Serial ports usually connect devices that do not require fast data transmission rates, such as a mouse, keyboard, or modem. A parallel port is an interface that connects devices by transferring more than one bit at a time. Many printers connect to the system unit using a parallel port. A universal serial bus (USB) port can connect up to 127 different peripheral devices with a single connector type, greatly simplifying the process of attaching devices to a personal computer.